Analysis Of Working Principle Of Automatic Unmanned Baling Machine
Baling machine, also known as baling machine or bundling machine,such as Paper Baler Machine, is a machine which USES bundling belt to wrap products or packages, then tighten and connect the two ends by thermal effect melting or using materials such as buckles. The function of the packing machine is to make the plastic belt adhere to the surface of the bundled package, so as to ensure that the package will not be scattered due to the weak binding during transportation and storage, and at the same time, the package should be tied neatly and aesthetically.
Structure and composition of baler: the baler is mainly composed of belt feeding, belt withdrawing, joint connection cutting device, transmission system, rail frame and control device.
Packing machine working principle: packaged objects in the baling press, first right acrosome, the front end of the compression zone, tied belt tightening on the object, then left the top body rise, the lower clamping band position, heating into two belt, the middle of the top knife, cut the ribbon, the next strapping tape in place, to complete a working cycle. A baler is a machine that USES wrapping tape to wrap a product or package, then tightens and connects the two ends by thermal effect melting or using materials such as buckles. The function of the baler is to make the plastic tape adhere to the surface of the package being bound.
Waster Sorting Machine supplier tells you that a fully automatic unmanned strapping machine works by strapping a product or package with a strapping band, then tightening and connecting the two ends by thermal melting or using materials such as buckles. The function of the packing machine is to make the plastic belt adhere to the surface of the bundled package, so as to ensure that the package will not be scattered due to the weak binding during transportation and storage, and at the same time, the package should be tied neatly and aesthetically.
1. Belt withdrawal and tensioning: a collet is raised to clamp the plastic head, the belt feeding wheel is reversed to withdraw the belt, the excess plastic belt is returned to the storage belt box, and the bundle is tightened. Then, the manipulator clamps the plastic belt, the package is further tightened to the degree of tightening.
2. With bonding: guide plate out from between two layers of plastic belt at the same time, electricity permed hair synchronous inserted between two layers of belt, then two chuck up in plastic zone, and take the lead in the other side cutter to cut off the tape, and will take the lead to permed hair, contact with hot melt, then electric permed hair exit quickly, cutting knife continue to rise to surface has two layers of molten plastic belt press on the bearing plate, and cooling solidification, two with glue.
3. Unbaling: the pressure plate should be removed from the strapped plastic band, and the chuck should be reset to complete the bundling.
4. Belt feeding: the belt feeding wheel rotates forward to send the plastic belt into the track from the belt storage box for the next bundling.
5. Unloading: the above is the process of single channel bundling. When the machine is in the state of continuous operation, after the belt feeding is completed, it will directly enter the belt withdrawal tensioning process, and the continuous process will be carried out according to the above procedures.
