1. The material of the hydraulic baler machine must be a hydraulically packed rack rod with defects such as deformation and cracks. The connecting parts and fasteners are strictly forbidden. The fasteners of the hydraulic baler and the connecting parts must not be welded. Way to fix.
2. The foundation of the hydraulic baler must be flat, compact and hard. The metal substrate must be flat and must not be deformed. When the ground is soft, the sweeping rod or pad must be used to increase the force surface and increase the stability.
3. All baler machine must be erected according to relevant standards and regulations (hydraulic balers should be horizontal and vertical, span and spacing should meet the requirements of the specification). No instability is allowed regardless of the height to which the hydraulic baler is placed.
4. The springboard on the hydraulic baler must be laid neatly, the width and length should be consistent (except for special parts). The springboard on any hydraulic baler must be fixed firmly and there must be no large holes on the platform surface (except for special parts).
