Reasons why the press head of hydraulic baler machine does not return:
1. Check the power control part of the solenoid valve first. The main compression cylinder of the household waste treatment equipment is always moving forward, and the system pressure increases. If the advance does not stop at this time, then you can determine that the front limit fault, check whether the front limit is damaged.
2. If the forward action is stopped, the head or not back, may be caused by the back limit, check whether the back solenoid valve power, if not power, is caused by the back limit, check the back limit can.
3. If the back solenoid valve has power, prove that there is no problem with the rear limit, or can not back, it may be the solenoid valve jammed phenomenon, can be disassembled the solenoid valve cleaning, disassembly should remember the shape of the valve, sequence, structure, etc., to avoid later installation mistakes. When installation should pay attention to valve seals installed to ensure the sealing effect.
4. It may be caused by the fact that there is no pressure in the oil line of domestic garbage treatment equipment, which cannot go back. If the compression is normal, the oil pump and cylinder are normal.
That's all for the sharing, thanks for your reading, and we also supply garbage sorting equipment for sale, if you have any demand for our products, just feel free to contact us.
